$1,075.00
Application
GM A-Body Vehicles
Equipped with rear coil spring suspension
Custom widths available at no additional charge
Using Aftermarket Upper Control Arms
Upper arm mounts are positioned close to the housing to minimize instant center changes
The vertical distance from axle center line to upper control arm mount center is 6.00″
Some upper control arms and spherical bearings may require modification to clear housing
Contact the manufacturer of the upper arms for compatibility before ordering this housing
Features
Center Housing – H1110
• Constructed from .141″ mild steel
• Heavy duty .282″ thick face plate
• Internal gussets provide rigidity and support axle tubes
• Slots allow exceptional weld contact of housing to tubes
Fill & Drain plugs – H1116 / H1117D
• Facilitate fluid changes
• Allows ring gear inspection
Tubing – H1139
• Mild steel
• 3″ OD x .250″ wall
• Brake line tabs
Vent – H1112B
• Prevents build-up of internal pressure
• Ensures sealing integrity
Upper Control Arm Mounts
• Billet one piece heavy duty steel construction
• Will not flex like two piece plate type
Lower Control Arm Mounts & Spring Cups
• Multiple mounting hole locations provide adjustability
(Not Offered In ’73-’77 Applications)
Housing Ends
• Forged steel
• Choice of Strange end
Professionally Welded
• Jig welded to ensure proper alignment
• Exceptional weld quality
Related Components
Gasket………………… H1111S
Axle Packages
Alloy………………. P3102 / P3104
Pro Race………… P1007 / P1008
See Our Full Line of Center Sections
Available for Drag Race Only, Street / Track, and Performance Street Vehicles
Description
Strange Ford 9 inch Rear End For GM A Body Vehicles
Strange Engineering has designed improvements to the Ford 9 inch rear ends for the automotive industry. One such application is the Strange GM A Body Ford 9 inch rear end that includes mounts, ends, fill, drain, & vent. Features multiple bolt holes for the lower control arms allowing alteration of leverage applied on the rear tires.
Strange has increased the strength of the Ford 9 inch in several different ways. The Strange 9 inch housing is a semi-floating, drop-out axle. Because of its strength you will see these 9 inch rear ends in just about every make of car, not just Fords.
The Ford 9 inch housing has a vast amount of ford 9 inch gear ratios available. This combined with easy assembly makes it popular for fine tuning your rear gear for any particular need. Strange Engineering is the most recognized name in the aftermarket industry when it comes to Ford 9 inch rears. From high performance street cars to Pro Mod, Strange Ford 9 inch housings are relied on by more racers than all other manufacturers combined.
You may also like…
-
HD Pro Aluminum Case Assembly Aluminum Support with Lightweight Steel Spool Standard Gear & Chrome Moly Yoke
$1,715.00 Select options -
HD Pro Aluminum Case Assembly Aluminum Support with Differential Standard Gear & 1350 Series Yoke
$1,875.00 Select options -
Pro Series Nodular Iron Case Assembly Aluminum Support with Lightweight Steel Spool Standard Gear & Chrome Moly Yoke
$1,465.00 Select options -
S-Series Nodular Iron Case Assembly Daytona Pinion Support with Differential Standard Gear & 1350 Series Yoke
$1,475.00 Select options