PRSF15-Strange S60 Rear End With GM F-Body Mounts 40 Spline Pro Race Axles and Spool

PRSFT65F10005-Strange S60 Ford Truck Rear End For 1965-1972 F100 Pick-Up Truck 35 Spline Alloy Axles and Trac-lock Differential 2

Complete Ford 9" Rear End Assembly - SAMPLE ONLY | Pro Iron Center Section With Spool & Standard Gear | Hy-Tuf Race Axles, and 2005-2014 Mustang Housing 3

Strange S60 Rear End With GM F-Body Mounts 35 Spline Alloy Axles and Helical Gear Differential

Name: Strange S60 Rear End With GM F-Body Mounts 35 Spline Alloy Axles and Helical Gear Differential
SKU: PRSF05
Availability: OutOfStock

$3,264.00

Application 1982-2002 Camaro / Firebird / Trans Am 1982-1992 Will not accept factory drum or disc brakes Can use 1981 and older drum brakes or 1998-2002 disc * * Disc brakes will not clear 82-92 factory rims 1993-1997 Will accept factory brakes Requires optional billet caliper mounts 1998-2002 Will accept factory brakes Custom made to your specifications Factory or custom widths available at no additional charge Choice of housing ends Professionally welded and assembled Crated to protect your investment Aftermarket torque arm may need to be modified Stock driveshaft will need to be replaced – See U1699F60 / U1699F60C Gear…

Out of stock

SKU: PRSF05

Category: Dana 60 rear axle

Tags: GM F-Body

Description
Additional information

Description

Dana 60 F-Body Rear End

The Strange Dana 60 F-Body Rear End (S60) is a huge improvement over the OEM Dana 60 rear axle while still accepting the same components.

Strange has designed a casting that is not only stronger but also thinner and lighter than the factory rear axle. The main caps and casting is made from a proprietary nodular iron. This formula is considerably stronger than cast iron. We eliminated the side carrier shims and the heavy duty main caps are fitted with adjuster nuts. The adjuster nuts allow the backlash and preload to be adjusted by a turn of a wrench. This in turn greatly reduces the time and effort to change a gear or differential.

The 9.750 inch ring gear can withstand a large amount of abuse. Equal to that of a 9 inch Ford gear, at a fraction of the price. It also happens to be more efficient, using less power to drive the ring and pinion. Comparing the weight to a similar 9 inch rear end the Strange S60 weights just 15 lbs more. If you compared it to an aftermarket 12 bolt it is around 20lbs more.

F-Body Specifics

The S60 rear end is equipped with 35-spline axle shafts without costly upgrades. The castings have a drain plug on the bottom. The GM F-body application has the torque arm mounting location cast directly into the unit. The HD 1350 series pinion yoke is larger than the factory pinion yoke and this will need to be taken into consideration when ordering the driveshaft.

This S60 Rear End is equipped with a Strange S-Trac (helical style) posi unit, Standard gear set, 35 spline Alloy axles, 12mm or 1/2” wheel studs, HD 1350 series yoke, u-bolt kit, and steel rear cover. Upgrades include provisions for ABS & 5/8” wheel studs. Options are a chrome moly 1350 series yoke and satin black powder coated housing. The steel cover would also be powder coated when this option is ordered.