GM 8.5 10 Blt 3.73 Standard Gear Set Richmond Gear - Produced in Italy
1 × $390.00
Hyperco Springs 12" x 2 1/2" ID - 150 Lbs
1 × $156.00
Strange Pro Series Rear Brake Kit For 3.150" Symmetrical Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $775.00
LPW HD Aluminum Support Cover Fits GM 8.2" & 8.5" 10 Bolt Rear Ends
1 × $195.00
Strange Pro Series H/D Front Brake Kit 1963-1964 Corvette - 4 3/4" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $975.00
Hyperco Springs 10" x 2 1/2" ID - 225 Lbs
1 × $156.00
Hyperco Springs 8" x 2 1/2" ID - 350 Lbs
1 × $156.00
Hyperco Springs 8" x 2 1/2" ID - 550 Lbs
1 × $156.00
Heavy Duty U-Joint Cap Kit Fits Strange 1480 Series Rear End Yoke
1 × $105.00
11 1/2" Slotted Steel Rotor For Strange 10 1/2" Live Axle Also 9/9.5" Live Axles Produced After 2012
1 × $173.60
Front 11" Carbon Brake Kit - 2" Piston For Strange S3423 Spindles Fits One Piece Billet or Forged Spindle Mount Wheels
1 × $2,995.00
1982-1992 Camaro Caster/Camber Kit Manufactured By Race Craft Chassis
1 × $400.00
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
1 × $99.00
Complete Installation Kit For Ford 8" Rear End
1 × $110.00
Strange HD Pro Aluminum Case Kit 3.062" Bore With Tapered / Ball Bearing Support
2 × $875.00
Strange S-Series Steel Spool For GM 8.5 with 28 Spline Axles
1 × $169.00
Strange Pro II H/D Front Brake Kit 1955-1957 Chevrolet - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,075.00
Ford 9 1/2" 5.17 Pro Gear with 28 Spline Pinion - Lightened Richmond Gear - Produced in Italy
1 × $820.00
Strange Pro Series Rear Brake Kit For 3.150" Symmetrical Housing Ends 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $775.00
Strange Pro Series Lightweight Steel Spool For Chevy 12 Bolt Car with 35 Spline Axles Fits 3 Series Gear Sets
1 × $198.00
Hyperco Springs 14" x 2 1/2" ID - 175 Lbs
1 × $156.00
Rear Pinion Bearing Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear
1 × $45.00
Front Pinion Bearing For Strange N1922 & N2322 Pinion Supports Using 28 Spline Pinion Gear
1 × $30.00
Strange 1/2"-20 x 3" Screw-in Wheel Stud
1 × $3.00
Subtotal: $11,862.60
