Strange Pro Series Dual Rear Brake Kit For Strange 3.150" Small GM Housing Ends 1 Piece Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
2 × $1,274.00
Strange S-Series Steel Spool Fits 1957-1964 Oldsmobile / Pontiac With Drop-Out Center - For 35 Spline Axles
1 × $229.00
Mopar 8 3/4" 4.30 Standard Gear - 742 Case Motive Performance Gear - Produced in Italy
2 × $315.00
Driveshaft Tubing - Chrome Moly 3" O.D. x .083" Wall - 5 Foot Piece
2 × $110.00
Ball Bearing Pinion Support Kit For Use With 28 Spline Pinion Shaft
2 × $235.00
Strange Pro II Dual Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
3 × $1,374.00
Pinion Support Ball Bearing For 35 Spline Pro Gears
2 × $165.00
Ford 9" Pinion Nut Fits 35 & 40 Spline Pinion Shafts
1 × $10.00
Strange Pro II H/D Front Brake Kit 1969-1982 Corvette - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,075.00
Axle Bearing With Locking Collar - Each For Small Ford 2.835" ID Housing End Fits Axles With 1.5635" Bearing Area
2 × $50.00
GM 8.4 Corvette 3.08 Gear Set Richmond Gear - Produced in Italy
1 × $490.00
Reluctor Ring Adapter / Bearing Spacer
4 × $22.00
Strange Pro Carbon Rear Brake Kit For 5" Bolt Circle Using 5/8" Studs Fits 1957-1964 Oldsmobile Ends
1 × $3,150.00
GM 12 Blt 3.31 Standard Gear Set US/Strange Gear - Produced in USA
1 × $372.00
.438" Spacer Washer For 5/8 Stud Kits
1 × $3.00
GM 8.6 Camaro 3.27 Gear Set Motive Performance Gear - Produced in Italy
1 × $435.00
Lower Control Arm Tube Kit With 1/2" I.D. Rod Ends For Strange Aluminum Struts
1 × $175.00
1330 Series Weld Yoke For 3" O.D. x .083" Wall Tubing
1 × $35.00
11 1/2" Carbon Brake Rotor For Strange 9 1/2", 10 1/2", 12", and 12 1/4" Live Axles
1 × $1,425.00
Braided Stainless Steel Brake Line - 18" Teflon® lined With Straight 3 AN Fittings
1 × $21.00
Strange Pro Series Rear Brake Kit For Strange 3.150" Small GM Housing Ends 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $775.00
Strange Pro Series Rear Brake Kit For Big Ford / Early Big Ford Housing Ends 1 Piece Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $775.00
Floater Hub Seal For Pro Touring Floater Kit
1 × $25.00
Strange Pro Series Rear Brake Kit For 3.350" Symmetrical Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $775.00
Hyperco Springs 12" x 2 1/2" ID - 185 Lbs
1 × $156.00
Ford 9" 5.00 Pro Gear with 28 Spline Pinion Richmond Gear - Produced in Italy
1 × $720.00
Hyperco Springs 14" x 2 1/2" ID - 175 Lbs
1 × $156.00
Pro Carbon Caliper Kit With Slotted Pads For Strange 2 Piece Pro Stock Axles
1 × $1,270.00
9" Ford Housing Center For Use With 3 1/4" OD Tubing
1 × $325.00
Subtotal: $20,905.00
