Ford 9" Pinion Seal For Tapered Bearing Support Using 35 Spline Pro Gear
1 × $10.00
Hyperco Springs 12" x 2 1/2" ID - 600 Lbs
1 × $156.00
Strange Pro Carbon Completion Kit Carbon Rotors & Pads, Ultra Calipers, & 5" BC Hats No Caliper Mounts
1 × $3,150.00
Street / Strip C-Clip Eliminator Kit For Strange Alloy & Pro Race Axles Fits 1986-1993 Mustang 8.8 With OEM Housing Ends
1 × $195.00
Strange Pro II Dual Rear Brake Kit For 3.150" Symmetrical Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,374.00
Strange Pro Series Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $775.00
Hyperco Springs 14" x 2 1/2" ID - 325 Lbs
1 × $156.00
Pro Series Steel Brake Completion Kit For Strange P1020 Axle Package 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $725.00
Strange Pro Carbon Rear Brake Kit For 4 3/4" Bolt Circle Using 5/8" Studs Fits 1957-1964 Oldsmobile Ends
1 × $3,150.00
Hyperco Springs 14" x 2 1/2" ID - 250 Lbs
1 × $156.00
Strange HD Pro Aluminum Case Kit 3.812" Bore With Tapered / Ball Bearing Support
1 × $875.00
Floater Hub Seal For Pro Touring Floater Kit
1 × $25.00
Strange Pro Series H/D Front Brake Kit 1991-1996 Corvette - 4 3/4" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,295.00
Hyperco Springs 14" x 2 1/2" ID - 225 Lbs
1 × $156.00
Lower Control Arm Tube Kit With 7/16" I.D. Rod Ends For Strange Aluminum Struts
1 × $175.00
Strange Ultra Case and Support Package 3.812" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pinion Gears
1 × $1,464.00
Strange Pro Series H/D Front Brake Kit Dart, Lancer, Barracuda, ... 4 1/2" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,050.00
Ford 9 1/2" 5.17 Pro Gear with 28 Spline Pinion - Lightened Richmond Gear - Produced in Italy
1 × $820.00
Strange Single Adjustable Front Strut 1987-1993 Mustang Fits V8 Spindles Only
1 × $149.00
AirHeart / Kelsey Hayes / Wilwood Brake Pad For Older 1 Piston Calipers With Round Pads
1 × $9.00
GM 8.5 10 Blt 3.42 Standard Gear Set Richmond Gear - Produced in Italy
1 × $415.00
Hyperco Springs 8" x 2 1/2" ID - 550 Lbs
1 × $156.00
Strange 1350 Series Transmission Yoke GM 27 Spline - Heavy Duty Nodular Iron
1 × $115.00
11 1/4" Slotted Steel Rotor For Floater Kits Produced Before 2013 With 4 3/4" & 5" Bolt Circles - Left Hand Side
1 × $185.00
Pro Carbon Caliper Kit With Slotted Pads For Strange 2 Piece Pro Stock Axles
1 × $1,270.00
Axle Bearing & Seal Kit For C-Clip Axles - Pair
1 × $70.00
Housing End For Strange 2 Piece Pro Stock Axle
1 × $100.00
Strange 1480 Series Transmission Yoke Lenco 32 Spline - Severe Duty Chrome Moly
1 × $295.00
Subtotal: $18,471.00
