Dana 60 5.38 Pro Gear Richmond Gear - Produced in Italy
1 × $600.00
Pinion Nut Washer For Strange Ultra Case Using Ball Bearing Support & 35 Spline Pro Gear
1 × $2.00
Mopar 8 3/4" 4.10 Standard Gear - 742 Case Richmond Gear - Produced in Italy
1 × $289.00
Strange Pro Series Lightweight Steel Spool Fits Ford 9" with 35 Spline Axles Requires 3.250" Bore Aftermarket Case
2 × $198.00
Strange Pro II Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $875.00
GM 12 Blt Truck 4.10 Standard Gear Set Richmond Gear - Produced in Italy
1 × $380.00
GM 7.5" & 7.625" 10 Bolt 3.73 Gear Set Richmond Gear - Produced in Italy
1 × $490.00
GM 8.5 10 Blt 5.38 Standard Gear Set Richmond Gear - Produced in Italy
2 × $399.00
Fill Plug Assembly
1 × $24.00
Strange Pro Series Dual Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,274.00
Rear Pinion Race For OEM Dana 60 & Strange S60
1 × $16.00
Wilwood / JFZ 4 Piston Caliper Brake Pad DRM-35 Metallic
1 × $25.00
GM 7.5" & 7.625" 10 Bolt 4.56 Gear Set Richmond Gear - Produced in Italy
1 × $380.00
Strange Pro II M/D Front Brake Kit Strange Aluminum Struts - 4 1/2" BC 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
1 × $825.00
GM 12 Blt Truck 3.08 Standard Gear Set Richmond Gear - Produced in Italy
1 × $380.00
GM 12 Blt 4.10 Standard Gear Richmond Gear - Produced in Italy
1 × $340.00
Complete Installation Kit For GM 8.5" 10 Bolt With 30 or 33 Spline Axles
1 × $98.00
Front Pinion Bearing For Strange N1922 & N2322 Pinion Supports Using 28 Spline Pinion Gear
1 × $30.00
Strange Aluminum Adjustable Height Spindles Provides The Ability To Tune By Altering Chassis Height (Steering Arms Are Not Included)
1 × $760.00
Mopar 8 3/4" 4.56 Standard Gear For 742 Case & 10 Spline Yoke Richmond Gear - Produced in Italy
1 × $290.00
Ford 9" Center Section Gasket Silicone Imprinted & Steel Reinforced
1 × $30.00
Strange Pro Series Rear Brake Kit For Strange 3.150" Small GM Housing Ends 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $775.00
Rear Pinion Bearing Adapter Sleeve For Ball Bearing Supports & 28 Spline Pinion Gear
1 × $30.00
GM 8.4 Corvette 3.90 Gear Set Richmond Gear - Produced in Italy
1 × $405.00
Floater Hub Race 2013+ Drag Race Floater Kits, Aluminum Pro Mod Rear Ends
1 × $38.00
Subtotal: $9,550.00
