$895.00
Application
Construction of 2005-2014 Mustang housing
Description
Strange HD Ford 9″ housing
Tubed with upper control arm mount & ends
Lower control arm mounts are not included
Note
Upper mount is moved forward .400″ and upward .400″
Aftermarket adjustable upper control arm must be used
Ordering a housing in this state is not recommended
Great care must be taken when performing any further welding
Housing end alignment should be re-checked once completed
Pinion offset is .125″ to passenger side
Information Required
Housing width
Type of housing ends
Center Housing – H1112 *
• Constructed from .141″ mild steel
• Heavy duty .282″ thick face plate
• Internal gussets provide rigidity and support axle tubes
• Slots allow exceptional weld contact of housing to tubes
• Extended cover provides clearance for 9″ & 9 1/2″ gear sets
* Modified for this application
Fill & Drain plugs – H1116 / H1117D
• Facilitate fluid changes
• Allows for inspection of ring gear
Vent – H1112B
• Prevents build-up of internal pressure
• Ensures sealing integrity
Housing Tubing – H1141
• DOM 1026 steel
• 3.250″ OD x .250″ wall thickness
2005-2014 Upper Control Arm Mount
• Strange Heavy Duty
Choice of Housing Ends – H1148 / H1137
• Forged chrome moly
• Accept 3.150″ bearings
• Other Strange housing ends are also available
Professionally Welded
• Jig welded to ensure proper alignment
• Tubes internally & externally welded to housing
• Provides maximum support & rigidity
Related Components
Gasket
Lube Locker………. H1111S
Axle Packages
Alloy 35………… P3502 / P350258
Pro Race 35….. P1007 / P100758
Pro Race 40….. P1016 / P1014
See Our Full Line of Center Sections
Available for Drag Race Only, Street / Track, and Performance Street Vehicles
Description
Ford 9″ housing / 2005 to present Mustang & Cobra Jet / with ends (no mounts)
Related products
-
Strange HD Ford 9″ Housing GM G-Body With Upper Mounts & Ends (No Spring Cups or Lower Mounts)
PN : HF9GGE$920.00 Read more -
Ford 9″ Bolt-In Rear End With Leaf Spring Mounts Series Iron Center Section With Differential Includes Housing & Alloy Axle Package
Read more -
Powder Coat New Housing At Time of Purchase – Satin Black
PN : H1199P-BLK$159.00 Read more -
Strange HD 9″ Ford Housing For GM G-Body Application Includes Mounts, Ends, Fill, Drain, & Vent
PN : HF9GGME$1,050.00 Read more
Recently viewed products
-
Sensor Plug O-Ring
PN : H1106U$0.33 Add to cart -
Strange HD Pro Aluminum Case Kit 3.062″ Bore With Tapered Bearing Support
PN : P3200$875.00 Add to cart -
Strange Pro II Dual Rear Brake Kit For OEM 86-93 Mustang Ends & Strange Parts 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
PN : B1714WCDM2$1,395.00 Select options -
Double Adjustable Rear Shock Multiple Applications
PN : S5072$295.00 Add to cart
-
Hyperco Springs 7" x 2 1/2" ID - 175 Lbs 5 × $156.00
-
Adjustable Pinion Preload Spacer For Ford 8.8 Rear Ends 1 × $22.00
-
1982-2002 Camaro / Firebird Single Adjustable Rear Shock 5 × $175.00
-
Strange Pro II Dual Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads 1 × $1,350.00
-
Strange Pro II H/D Front Brake Kit For GM 1971-1977 Monza / Vega 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 4 × $1,085.00
-
Complete Installation Kit For Ford 8" Rear End 1 × $110.00
-
AirHeart / Kelsey Hayes / Wilwood Brake Pad For Older 1 Piston Calipers With Round Pads 2 × $9.00
-
GM 8.5 10 Blt 3.73 Standard Gear Set Richmond Gear - Produced in Italy 1 × $390.00
-
Strange Pro Series HD Lightweight Steel Spool Fits Ford 9" with 40 Spline Axles Requires 3.812" Bore Strange Case 1 × $295.00
-
Hyperco Springs 12" x 2 1/2" ID - 450 Lbs 3 × $156.00
-
Seamless Chrome Moly Driveshaft Assembly With HD Trans Yoke, 1350 Weld Ends & U-joints For Strange S60 Installed in 1993-2002 GM F-Body 1 × $360.00
-
Strange Ultra Case and Support Package 3.812" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pinion Gears 2 × $1,464.00
-
3 AN x 1/8" NPT 45° Fitting 2 × $8.00
-
Hyperco Springs 16" x 2 1/2" ID - 100 Lbs 1 × $156.00
-
2014-19 Corvette 4.10 Standard Gear Set Motive V888410 Performance Gear - Produced in Italy 1 × $1,060.00
-
Double Adjustable Coil-Over Strut 2005-2014 Mustang 1 × $529.00
-
Strange Pro Series Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads 1 × $775.00
-
Strange Ultra Case and Support Package 3.250" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears 1 × $1,395.00
-
1310 Series U-Joint 2 × $30.00
-
Hyperco Springs 8" x 2 1/2" ID - 250 Lbs 1 × $156.00
-
Strange Pro Carbon Completion Kit Carbon Rotors & Pads, Ultra Calipers, & 4 3/4" BC Hats No Caliper Mounts 1 × $3,150.00
-
Strange 1350 Series Transmission Yoke Lenco 16 Spline - Severe Duty Chrome Moly 1 × $200.00
-
Double Adjustable Coil-Over Strut 2015-2020 Mustang 1 × $529.00
-
Strange Pro II H/D Front Brake Kit '67-'69 Camaro, '67-'72 Chevelle, ... 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 3 × $1,075.00
-
Strange 1350 Series Transmission Yoke Mopar 30 Spline - Severe Duty Chrome Moly 5 × $185.00
-
Strange Brake Pressure Gauge Includes Bleed Screw Adapter Fitting 1 × $45.00
-
Hyperco Springs 14" x 2 1/2" ID - 225 Lbs 2 × $156.00
-
Hyperco Springs 7" x 2 1/2" ID - 500 Lbs 2 × $156.00
-
GM 7.5 10 Bolt Ring Gear Spacer Adapts 2 Series Carrier to 3 Series Gear 2 × $50.00
-
Hyperco Springs 10" x 2 1/2" ID - 250 Lbs 1 × $156.00
-
Hyperco Springs 14" x 2 1/2" ID - 350 Lbs 1 × $156.00
-
Hyperco Springs 10" x 2 1/2" ID - 225 Lbs 1 × $156.00
-
Strange Billet 1350 Series Yoke For Ford 9" Using 28 Spline Pinion Shaft 1 × $295.00
-
Double Adjustable Rear Shock Multiple Applications 1 × $295.00
-
Hyperco Springs 14" x 2 1/2" ID - 100 Lbs 2 × $156.00
-
Complete Installation Kit For 1986-2014 Ford 8.8 2 × $98.00
-
Rear Pinion Bearing Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear 1 × $45.00
-
Strange Pro II H/D Front Brake Kit 1965-1968 Corvette - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 2 × $1,075.00
-
Double Adjustable Front Shock GM Applications 2 × $295.00
-
Ford 9" Pinion Depth Shim Kit 2 × $16.00
-
Strange Pro II Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 3 × $875.00
-
Strange Pro Series Rear Brake Kit For 05-14 Mustang OEM Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 2 × $850.00
-
Single Adjustable Rear Shock Mopar - Multiple Applications 5 × $175.00
-
Knight Springs 12" x 2 1/2" ID - 150 Lbs 1 × $80.00
-
Strange Pro Series Lightweight Steel Spool For Chevy 12 Bolt Car with 35 Spline Axles Fits 3 Series Gear Sets 1 × $198.00
-
Sensor Plug O-Ring 1 × $0.33
-
GM 12 Blt 3.08 Standard Gear Set Richmond Gear - Produced in Italy 1 × $397.00
-
Strange Ultra Case and Support Package Lightened 3.812" Bore Case & Taper / Ball Bearing Support Includes Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears 1 × $1,464.00
-
1982-2002 Camaro / Firebird Double Adjustable Rear Shock 2 × $295.00
-
Single Adjustable Rear Shock Multiple GM Applications 1 × $175.00
-
Strange 1/2"-20 x 3" Screw-in Wheel Stud 3 × $3.00
-
Strange Pro II H/D Front Brake Kit Dart, Lancer, Barracuda, ... 4 1/2" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $1,150.00
-
Strange Dual Remote Reservoir 2 × $164.00
-
Strange S-Series Steel Spool For GM 8.5 with 30 Spline Axles 2 × $169.00
-
Strange Ball Bearing Pinion Support Includes Bearings & Seal For 28 Spline Pinion Fits 9" Ford Center Sections Used For Drag Racing 2 × $395.00
-
Basic Installation Kit For Ford 8" Rear End Bearings & Races Are Not Included 2 × $35.00
-
Master Cylinder Rebuild Kit For Strange B3364 Master Cylinder 3 × $35.00
-
Strange Pro II Dual Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $1,350.00
-
Hyperco Springs 12" x 2 1/2" ID - 200 Lbs 1 × $156.00
-
Carbon Brake Conversion Kit Upgrades From Steel to Carbon Brakes For Strange 10 1/2" Live Axle and 2013 & Later 9 / 9 1/2" Top Loader 1 × $3,895.00
-
Dual Master Cylinder - 1.032" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware 1 × $99.00
-
Strange 1350 Series Transmission Yoke GM 27 Spline - Heavy Duty Nodular Iron 2 × $115.00
-
Strange Pro Series M/D Front Brake Kit For 1994-2004 Mustang Reusing OEM Hubs 1 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads 1 × $575.00
-
Strange Door Car Steering Rack 22:1 Ratio - 24 1/2" Tie Rod Centers 1 × $695.00
-
3 AN Coupling Nut Sleeve 1 × $1.00
-
Strange 11" Carbon Brake Rotor For Front and Rear Carbon Brake Kits 2 × $850.00
-
5/8" Stud Kit with 1.500" Wide Shank Includes Lug Nuts & .438" Thick Washers 2 × $100.00
-
ARP 7/16" Ring Gear Bolt Kit For 9" Ford 40 Spline HD Aluminum Spool 5 × $90.00
-
Solid Pinion Bearing Preload Spacer 1 × $15.00
-
Strange Pro Series H/D Front Brake Kit '66-'69 Fairlane, '67-'69 Mustang, ... 4 1/2" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $975.00
-
Rear Pinion Race Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear 1 × $30.00
-
Double Adjustable Front Shock Multiple Ford / Mercury Applications 1 × $295.00
-
Hyperco Springs 14" x 2 1/2" ID - 325 Lbs 1 × $156.00
-
Ford Mustang OEM Reluctor Ring - Each For 2005-2014 C-Clip Style Axle 1 × $60.00
-
Hyperco Springs 10" x 2 1/2" ID - 400 Lbs 1 × $156.00
-
1/2" x 3" Allen Head Stud 1 × $5.50
-
Wilwood / JFZ 2 Piston Caliper Brake Pad Semi Metallic 2 × $16.00
-
ABS Sensor Adapter For Strange Pro Touring Floater Kit When Using 2011-2014 Mustang ABS System 1 × $33.00
-
Braided Stainless Steel Brake Line - 22" Teflon® lined With Straight 3 AN Fittings 1 × $21.00
-
Pro Series II Spindle Mount Brake Kit For Altereds & Funny Cars with S3423 Spindles Single Piston Calipers & Two Piece Slotted Rotors 3 × $725.00
-
Residual Pressure Valve - 10 Lbs 5 × $25.00
-
Floater Hub Seal 2012 & Older Drag Race Floater Kits 1 × $20.00
-
GM 8.5 10 Blt 3.42 Standard Gear Set Richmond Gear - Produced in Italy 2 × $415.00
-
Strange S-Series Steel Spool For GM 8.5 with 28 Spline Axles 1 × $169.00
-
Strange Single Adjustable Front Strut 2005-2010 Mustang 2 × $169.00
-
Strange Pro Carbon Rear Brake Kit For 4 3/4" Bolt Circle Using 5/8" Studs Fits 1957-1964 Oldsmobile Ends 1 × $3,150.00
-
Strange Pro Series Rear Brake Kit For 3.150" Symmetrical Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $775.00
-
Strange 1350 Series Transmission Yoke Ford 28 Spline - Severe Duty Chrome Moly 3 × $185.00
-
Dual Master Cylinder Strange Fast Fill Design Includes Remote Reservoir 1 × $590.00
-
Strange Quick Release Hub Designed For Grant Steering Wheels 1 × $135.00
-
GM 8.5 10 Blt 5.57 Standard Gear Set Richmond Gear - Produced in Italy 1 × $360.00
-
GM 12 Bolt Pinion Bearing Preload Assembly 1 × $32.00
-
1979-1993 Mustang Manual Brake Conversion Kit 2 × $169.00
-
Strange Pro II Rear Brake Kit For Big Ford / Early Big Ford Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $875.00
-
Axle Bearing With Locking Collar - Each For A1032 and A1092 Eliminator Kits Fits Axles With 1.400" Bearing Area 2 × $50.00
-
5/8" Stud Kit with 1.875" Wide Shank Includes Lug Nuts & .250" Thick Washers 1 × $100.00
-
2 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes 1 × $70.00
-
Carbon Brake Kit For Strange 9" / 9 1/2" Top Load Live Axle Fits 2012 And Older Rear Ends 1 × $4,750.00
-
Strange Ultra Case and Support Package Lightened 3.812" Bore Case & Taper / Ball Bearing Support Includes Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears 1 × $1,495.00
-
C-Clip Eliminator Kit - For Drag Racing Only For Pro Race Axles With 1.563" Bearing Area Fits Small GM OEM Housing Ends 1 × $210.00
-
Front Pinion Race For Strange N1922 & N2322 Pinion Supports Using 28 or 35 Spline Pinion Gear 1 × $15.00
-
Master Cylinder Adapter Fitting 1/2"-20 Inverted Flare to 3 AN 1 × $10.00
-
Load Bolt Assembly For Strange Ultra Case & HD Pro Aluminum Case 1 × $39.00
-
Ford 9" Basic Installation Kit For Open Differentials 1 × $37.00
-
Strange Chrome Moly 1350 Series Yoke Fits GM 8.5 10 Bolt Rear Ends 3 × $150.00
-
GM 8.4 Corvette 3.08 Gear Set Richmond Gear - Produced in Italy 1 × $490.00
-
Strange Pro Series Rear Brake Kit For Large GM OEM Ends & Strange Components 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads 1 × $825.00
-
Hyperco Springs 14" x 2 1/2" ID - 325 Lbs 1 × $156.00
-
Strange 12 Bolt Casting Plug Used For 3 Channel ABS 1 × $16.50