Carbon Brake Conversion Kit Upgrades From Steel to Carbon Brakes For Strange 10 1/2" Live Axle and 2013 & Later 9 / 9 1/2" Top Loader
1 × $3,895.00
Strange Ultra Case and Support Package Lightened 3.812" Bore Case & Taper / Ball Bearing Support Includes Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears
1 × $1,464.00
Strange Pro II Rear Brake Kit For Strange Aluminum Dragster Housing 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $880.00
Hyperco Springs 12" x 2 1/2" ID - 85 Lbs
1 × $156.00
Single Piston Front Carbon Brake Caliper For Strange Spindle Mount 11" Carbon Brake Kits
2 × $145.00
Ford 9" Pinion Seal For Ball Bearing Support Using 35 Spline Pro Gear
1 × $12.00
Eaton Detroit Locker Fits Dana 60 With 35 Spline Axles - 3 Series
1 × $795.00
Hyperco Springs 7" x 2 1/2" ID - 175 Lbs
2 × $156.00
Strange Pro II H/D Front Brake Kit 1997-2019 Corvette Reusing OEM Hubs 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,075.00
Single Adjustable Rear Shock 2005-2014 Mustang
1 × $160.00
Rear Caliper Mount - LH Side For Strange 12 Bolt F-Body Rear End Using 1993-1997 F-Body Factory Disc Brakes
1 × $80.00
Panhard Bar Kit Strange HD Ford 9" Housing For 1967-1972 Chevy C10 Truck
2 × $115.00
Strange M12-1.5 x 50mm Stud Kit
1 × $30.00
Master Cylinder Adapter Fitting 1/2"-20 Inverted Flare to 3 AN
1 × $10.00
GM 12 Bolt Pinion Bearing Preload Assembly
1 × $32.00
Double Adjustable Rear Shock 1965-1969 F100 Pick-Up
1 × $295.00
Strange Pro II Rear Brake Kit For Strange H1147 Housing Ends 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $925.00
Complete Installation Kit For 742 Case Using OEM Differential
1 × $145.00
Basic Installation Kit For GM 12 Bolt Car Bearings & Races Not Included
1 × $35.00
ABS Sensor Adapter For Strange Pro Touring Floater Kit When Using 2011-2014 Mustang ABS System
1 × $33.00
Hardened Washer For 1/2" Bolt - .0625" Thick
1 × $0.28
1/2" x 3" Allen Head Stud
1 × $5.50
Strange Pro Carbon Completion Kit Carbon Rotors & Pads, Ultra Calipers, & 4 3/4" BC Hats No Caliper Mounts
2 × $3,150.00
Strange Pro II H/D Front Brake Kit 1955-1957 Chevrolet - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,075.00
Strange 4 Piston Billet Caliper Black
1 × $200.00
11 1/4" Slotted Steel Rotor For Floater Kits Produced Before 2013 With 5 1/2" Bolt Circle - Left Hand Side
2 × $185.00
GM 12 Bolt Rear Pinion Bearing For Passenger Car Rear Ends
1 × $16.00
Drag Race Door Car Front Plumbing Kit With 3 AN Braided Stainless Steel Lines & Fittings
1 × $88.00
Heavy Duty U-Joint Cap Kit Fits Strange 1350 Series Rear End Yokes
1 × $95.00
Strange Pro Series H/D Front Brake Kit 2005-2014 Mustang Reusing OEM Hubs 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $850.00
Strange Pro II Rear Brake Kit For 3.150" Symmetrical Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $875.00
GM 8.6 Camaro 4.10 Gear Set Motive Performance Gear - Produced in Italy
1 × $565.00
3 AN 90° Bulkhead Fitting
1 × $15.00
Pinion Support Bearing Kit For Use With 28 Spline Pinion Shaft
1 × $105.00
Strange 11.250" 2 Pc Rotor Assembly For Pro II Brake Kits - Right Hand Side
1 × $225.00
Tapered Axle Bearing Assembly - Each For 3.150" ID Housing End Fits Axles With 1.5635" Bearing Area
1 × $45.00
Strange Pro II H/D Front Brake Kit 1965-1968 Corvette - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,075.00
Subtotal: $22,758.78
