Master Cylinder Rebuild Kit For Strange B3362 Master Cylinder
1 × $40.00
GM 7.5 10 Bolt Ring Gear Spacer Adapts 2 Series Carrier to 3 Series Gear
1 × $50.00
5/8" Stud Kit with 1.500" Wide Shank Includes Lug Nuts & .250" Thick Washers
1 × $100.00
Strange Pro Series Rear Brake Kit For 3.150" Symmetrical Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $775.00
Double Adjustable Rear Shock 1965-1969 F100 Pick-Up
2 × $295.00
Weld Tab For Bulkhead Fitting
3 × $4.00
Hyperco Springs 14" x 2 1/2" ID - 325 Lbs
1 × $156.00
GM 8.5 10 Blt 5.57 Standard Gear Set Richmond Gear - Produced in Italy
1 × $360.00
8 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes
2 × $140.00
Complete Installation Kit For Chevy 12 Bolt Passenger Car
1 × $105.00
3 AN Bulkhead Union
1 × $5.00
Mopar Old Style Axle Bearing & Plate - Each For 2.875" ID Mopar Housing End Fits Axles With 1.5635" Bearing Area
1 × $60.00
4 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes
1 × $85.00
Hyperco Springs 14" x 2 1/2" ID - 85 Lbs
1 × $156.00
Hyperco Springs 10" x 2 1/2" ID - 350 Lbs
2 × $156.00
Dual Master Cylinder - 1.032" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
1 × $99.00
Strange 1350 Series Transmission Yoke GM 32 Spline - Heavy Duty Nodular Iron
1 × $115.00
Hyperco Springs 8" x 2 1/2" ID - 350 Lbs
2 × $156.00
Strange Pro II Rear Brake Kit For 3.350" Symmetrical Housing Ends 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
2 × $875.00
Strange S-Series Steel Spool For GM 8.5 with 30 Spline Axles
1 × $169.00
Strange Pro Series H/D Front Brake Kit 1955-1957 Chevrolet - 4 3/4" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $975.00
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
3 × $99.00
Ball Bearing Pinion Support Kit For Use With 35 Spline Pro Gear
1 × $235.00
Strange Street / Strip Eliminator Kit For OEM & Aftermarket C-Clip Style Axles Fits Chevy 8.2, 8.5, or 12 Bolt with Small GM Ends
1 × $210.00
Hyperco Springs 8" x 2 1/2" ID - 300 Lbs
1 × $156.00
Dana 60 Pinion Depth Shims, Preload Shims, Cover Gasket, and Pinion Nut
1 × $90.00
1982-1992 Camaro Caster/Camber Kit Manufactured By Race Craft Chassis
1 × $400.00
5/8" Stud Kit with 1.187" Wide Shank Includes Lug Nuts & .688" Thick Washers
1 × $100.00
3 AN 90° Bulkhead Fitting
1 × $15.00
Hyperco Springs 12" x 2 1/2" ID - 185 Lbs
1 × $156.00
Strange S-Series Steel Spool For GM 8.5 with 28 Spline Axles
1 × $169.00
Subtotal: $8,334.00
