S60 GM F-Body Housing With Housing Ends – No Mounts

Description
Strange S60 F-Body housing
Tubed with choice of housing ends – No mounts

Note
Ordering a housing in this state is not recommended
Great care must be taken when performing any further welding
Housing end alignment should be re-checked once completed

Information Required
Housing ends
Housing width

Features
Nodular Iron Center – H1105A
– Integral torque arm provision
– Nodular iron main caps
– Adjuster nuts eliminate side bearing shims
– Greatly simplifies gear changes
– Three channel sensor hole
– Accepts Dana 60 internal components *

* Uses different side bearing races

3″ x .250″ Wall Tubes – H1139
– Seamless DOM mild steel

Choice Of Housing Ends – H1143 / H1144 / H1137
– Forged chrome moly
– Accepts 3.150″ tapered or ball style bearings
– H1144 end clearenced for 4 channel ABS
– Other Strange housing ends are also available

Choice Of Housing Width
– Factory width
– Custom width at no additional charge

Professionally Welded
– Jig welded to ensure proper alignment
– Tubes plug & 360° welded to casting
– Eliminates tube rotation issues

Notes
Specify if using 3 channel, 4 channel, or no ABS
3 channel ABS utilizes OEM sensor

Rear End Covers
Aluminum covers will not fit due to limited vehicle clearances

Related Components
Adjuster nut wrench………………. H1109D
Steel cover………………………………. D3505
Cover gasket…………………….. D3508 / D3508F
Gear install kit…………………………. D3512

Alloy Axle Packages
35 spline………………………….. P3502 / P350258
35 spline with spool……….. P3502S / P350258S

Pro Race Packages
35 spline with spool…………. P2007 / P200758
40 spline with spool…………. P2017 / P2015