Double Adjustable Coil-Over Strut 2015-2020 Mustang
1 × $529.00
Strange Pro II Front Brake Kit 1994-2004 Ford Mustang - 4 1/2" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,175.00
Solid Adjuster Nuts - Pr Fits Strange 3.250" Bore Cases
5 × $37.66
Strange Pro II M/D Front Brake Kit For 1994-2004 Mustang Reusing OEM Hubs 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
2 × $675.00
Dana 36 Corvette 3.54 Gear US/Strange Gear - Produced in USA
1 × $407.00
ABS Sensor Adapter For Strange Pro Touring Floater Kit When Using 2011-2014 Mustang ABS System
1 × $33.00
3 Channel ABS Sensor Fits Strange F-Body 12 Bolt
1 × $100.00
Basic Installation Kit For GM 8.5" 10 Bolt Bearings & Races Not Included
1 × $35.00
Strange S-Series 9" Case Nodular Iron - 3.250" Bore
2 × $289.00
Complete Installation Kit For Strange S60 Rear End
2 × $250.00
5/8" Stud Kit with .875" Wide Shank Includes Lug Nuts & .250" Thick Washers
12 × $100.00
Ford Mustang OEM Reluctor Ring - Each For 2005-2014 C-Clip Style Axle
1 × $60.00
3 AN x 1/8" NPT 45° Fitting
1 × $8.00
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware
1 × $99.00
Strange Ultra Case and Support Package 3.812" Bore Case & Tapered Bearing Support With Installation Kit For 10" Pro Gears
2 × $1,395.00
Pinion Support Bearing Kit For Use With 28 Spline Pinion Shaft
1 × $105.00
LPW Ultimate Support Cover For GM 7.5 / 7.625 10 Bolt - Accepts Brace Kit
2 × $215.00
Pinion Support Ball Bearing For 35 Spline Pro Gears
1 × $165.00
Strange Dragster Steering Rack 12:1 Ratio - 11" Tie Rod Centers
1 × $395.00
Pinion Depth Shim Kit For Strange Ultra Case & Billet Case
3 × $45.00
2016-2023 Camaro Strut Double Adjustable Coil-Over
2 × $529.00
Retaining Nut For Bulkhead Fitting
2 × $1.00
Pinion Support Bearing Kit For Use With 35 Spline Pinion Shaft
1 × $105.00
Strange 10" 2 Piece Rotor - Left Hand Side Fits Spindle Mount Wheels Requiring 1" Offset
1 × $250.00
OEM Ford Daytona Pinion Support Cast Iron - With Races Installed
1 × $115.00
5/8" Stud Kit with 1.875" Wide Shank Includes Lug Nuts & .438" Thick Washers
2 × $100.00
Strange Pro Series Rear Brake Kit For Large GM OEM Ends & Strange Components 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $825.00
3 AN Coupling Nut Sleeve
1 × $1.00
Strange Billet 4 Piston Caliper Kit - Red With DTC-30 Semi Metallic Brake Pads
1 × $489.00
Single Piston Front Carbon Brake Caliper For Strange Spindle Mount 11" Carbon Brake Kits
1 × $145.00
Strange 5/8"-18 x 3" Sleeve Style Stud Kit Includes .875" Wide Sleeves, Nuts, & .438" Thick Washers
4 × $100.00
Pinion Seal Kit For OEM Dana 60 & Strange S60
1 × $12.00
DTC-30 Semi-Metallic Brake Pad For Strange Four Piston Caliper
1 × $25.00
Semi Metallic Brake Pad For Strange Single and Two Piston Calipers
1 × $15.00
Strange 4 Piston Billet Caliper Black
1 × $200.00
Strange Two Piston Caliper Kit With Semi Metallic Pads
1 × $230.00
Street / Strip C-Clip Eliminator Kit For OEM or Aftermarket C-Clip Style Axles Fits 1986-1993 Mustang 8.8 With OEM Housing Ends
1 × $195.00
Strange 10" Steel Rotor - Left Hand Side Fits Spindle Mount Wheels Requiring 1" Offset
1 × $155.00
Strange 10" Steel Rotor - Right Hand Side For Strange Aluminum Struts Spindle Mount Wheels Requiring 1 1/2" Offset
1 × $155.00
Strange Pro II M/D Front Brake Kit 1998-2002 Camaro & Firebird - Reuses OEM Hubs 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
2 × $785.00
9" Ford Tail Bearing Retainer
1 × $3.50
Subtotal: $16,432.80
