Strange Pro II H/D Front Brake Kit 1955-1957 Chevrolet - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
2 × $1,075.00
Street / Strip C-Clip Eliminator Kit For Strange Alloy & Pro Race Axles Fits 1986-1993 Mustang 8.8 With OEM Housing Ends
1 × $195.00
Master Cylinder Rebuild Kit For Strange B3364 Master Cylinder
1 × $35.00
Hyperco Springs 8" x 2 1/2" ID - 400 Lbs
1 × $156.00
Strange Pro Series H/D Front Brake Kit For Santhuff Struts - 4 3/4" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $950.00
1/2" x 3" Allen Head Stud
1 × $5.50
Strange 1350 Series Transmission Yoke Lenco 32 Spline - Severe Duty Chrome Moly
1 × $200.00
Strange Weld Yoke - Forged Chrome Moly For 3 1/2" OD x .083" Wall Tubing & 1350 Series U-Joint
1 × $85.00
Strange Ball Bearing Pinion Support Includes Bearings & Seal For 28 Spline Pinion Fits 9" Ford Center Sections Used For Drag Racing
1 × $395.00
4 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes
2 × $85.00
5/8" Stud Kit with 1.875" Wide Shank Includes Lug Nuts & .688" Thick Washers
1 × $100.00
Strange Ultra Case and Support Package 3.812" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pinion Gears
1 × $1,464.00
Strange Pro II Rear Brake Kit For Large GM OEM Ends & Strange Components 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $925.00
Housing End Stud Kit - 3/8"
1 × $35.00
5/8" Stud Kit with .875" Wide Shank Includes Lug Nuts & .438" Thick Washers
1 × $100.00
Basic Installation Kit For GM 12 Bolt Car Bearings & Races Not Included
1 × $35.00
Hyperco Springs 14" x 2 1/2" ID - 325 Lbs
1 × $156.00
Strange Pro Series H/D Front Brake Kit 2005-2014 Mustang - 4 1/2" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,075.00
Hyperco Springs 7" x 2 1/2" ID - 500 Lbs
1 × $156.00
Subtotal: $8,387.50
