Shop Drag Racing Parts – This is a page that lists all of our products.
Strange Engineering has been the leader of driveline and suspension components in the performance industry for over 50 years. Strange has grown from a two car garage in the late 50’s to an industry leading manufacturer housed on a 120,000 square foot site. Built on the principles of quality products, quality service and a true enthusiasm for the automotive industry, Strange products can be found in the fastest accelerating vehicles on the planet.
Strange Engineering has worked with most talented racers and crew chiefs to develop a superior line of drag race components. The extensive line of innovative products includes axles, brakes, shocks, struts and complete rear end assemblies. Our in-house engineers continually look for ways to create and improve new components which will keep Strange Engineering a drag racing parts leader for years to come.
-
Rear Pinion Race For Strange N1922 & N2322 Pinion Supports Using 28 or 35 Spline Pinion Gear
$19.00 Add to cart -
Rear Pinion Bearing Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear
$45.00 Add to cart -
Rear Pinion Race Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear
$30.00 Add to cart -
Pinion Support Ball Bearing For 28 Spline Pinion Gears
$135.00 Add to cart -
Pinion Support Ball Bearing For 35 Spline Pro Gears
$165.00 Add to cart -
9″ Ford Tail Bearing For OEM Ford & Strange L/W Aluminum, S-Series, & Pro Iron Cases
$35.00 Add to cart -
9″ Ford Tail Bearing Retainer
$3.50 Add to cart -
Tail Bearing Retainer Plate Kit For HD Pro, Ultra, & Billet Cases
$12.00 Add to cart -
Tapered Bearing Pinion Support For Strange Ultra Case
$250.00 Add to cart -
Tapered Bearing Pinion Support For Strange Ultra Case Using 10″ Gear
$450.00 Add to cart -
Tapered / Ball Bearing Pinion Support For Strange Ultra Case
$275.00 Add to cart -
Tapered / Ball Bearing Pinion Support For Strange Lightened Ultra Case
$345.00 Add to cart -
Tapered Bearing Pinion Support For Strange Billet Case Using 9″ or 9 1/2″ Gear
$350.00 Add to cart -
Tapered Bearing Pinion Support For Strange Billet Case Using 10″ Gear
$350.00 Add to cart -
Taper / Ball Bearing Pinion Support For Strange Billet Case Using 9″ or 9 1/2″ Gear
$400.00 Add to cart -
Taper / Ball Bearing Pinion Support For Strange Billet Case Using 10″ Gear
$450.00 Add to cart
Dana 60 5.38 Pro Gear Richmond Gear - Produced in Italy
Strange Billet 4 Piston Caliper Kit - Red With DRM-35 Metallic Brake Pads
Hyperco Springs 12" x 2 1/2" ID - 95 Lbs
Strange 1350 Series Transmission Yoke Lenco 16 Spline - Severe Duty Chrome Moly
Ford Super 8.8 4.56 Standard Gear Set Richmond Gear - Produced in Italy
Hyperco Springs 8" x 2 1/2" ID - 550 Lbs
Hyperco Springs 14" x 2 1/2" ID - 85 Lbs
Strange Ultra Case and Support Package 3.812" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pinion Gears
GM 8.6 Camaro 3.45 Gear Set Motive Performance Gear - Produced in Italy
Housing Ends Late Big Ford - Clearance For ABS Sensor
Side Bearing Kit GM 8.5 10 Bolt with 30 / 33 Spline Carrier Chevy 8.2 10 Bolt with Strange 33 Spline Spool
GM 12 Bolt Car Aluminum Main Caps Includes Bolts - Machining Required
GM 12 Blt 5.14 Standard Gear Richmond Gear - Produced in Italy
2 Magnet Pick-Up Collar For Strange 9" Ford Premium 28 Spline Yokes
10 3/4" Slotted Steel Rotor - LH Side For Strange 9/9.5" Live Axles Produced Before 2013
Hyperco Springs 10" x 2 1/2" ID - 550 Lbs
Drum Brake Kit For Big Ford / Early Big Ford Housing Ends
Knight Springs 14" x 2 1/2" ID - 95 Lbs
2005-2014 Mustang Caster/Camber Kit Manufactured By Race Craft Chassis
5/8" Pro Touring Floater Stud
Double Adjustable Coil-Over Strut 1982-1992 Camaro
GM 8.5 10 Blt 3.42 Standard Gear Set Motive Performance Gear - Produced in Italy
1 Magnet Pick-Up Collar For Strange 9" Ford Premium 28 Spline Yokes
GM 8.4 Corvette 4.56 Gear - Thick US/Strange Gear - Produced in USA
5/8" Stud Kit with .775" Wide Shank Includes Lug Nuts & .250" Thick Washers
Pro Carbon Caliper Kit With Pads For Strange 9" / 9 1/2" Live Axle
GM 12 Blt Truck 3.42 Standard Gear Set Richmond Gear - Produced in Italy
Strange Quick Release Hub Designed For Sparco Steering Wheels
Ford 10" 4.11 Pro Gear with 35 Spline Pinion US/Strange Gear - Produced in USA
Axle Bearing With Locking Collar - Each For Small Ford 2.835" ID Housing End Fits Axles With 1.5635" Bearing Area
Ford 9" 3.89 Standard Gear Set Motive Performance Gear - Produced in Italy
Housing Ends Small GM - For 3.150" Bearing Clearance For 4 Channel ABS Sensor
Wilwood / JFZ 4 Piston Caliper Brake Pad DRM-35 Metallic


