Shop Drag Racing Parts – This is a page that lists all of our products.
Strange Engineering has been the leader of driveline and suspension components in the performance industry for over 50 years. Strange has grown from a two car garage in the late 50’s to an industry leading manufacturer housed on a 120,000 square foot site. Built on the principles of quality products, quality service and a true enthusiasm for the automotive industry, Strange products can be found in the fastest accelerating vehicles on the planet.
Strange Engineering has worked with most talented racers and crew chiefs to develop a superior line of drag race components. The extensive line of innovative products includes axles, brakes, shocks, struts and complete rear end assemblies. Our in-house engineers continually look for ways to create and improve new components which will keep Strange Engineering a drag racing parts leader for years to come.
-
HD Pro Aluminum Case Assembly Aluminum Support with HD 40 Spline Lightweight Spool 28 Spline Pro Gear & Female Coupler
$1,975.00 Select options -
Aluminum Ultra Case Assembly Lightweight 35 Spline Steel Spool 28 Spline Pro Gear & Chrome Moly Yoke
$2,029.00 Select options -
Aluminum Ultra Case Assembly Lightweight 35 Spline Steel Spool 28 Spline Pro Gear & Female Coupler
$2,010.00 Select options -
Aluminum Ultra Case Assembly HD 40 Spline Lightweight Steel Spool 28 Spline Pro Gear & Chrome Moly Yoke
$2,125.00 Select options -
Aluminum Ultra Case Assembly HD 40 Spline Lightweight Steel Spool 28 Spline Pro Gear & Female Coupler
$2,105.00 Select options -
Aluminum Ultra Case Assembly HD 40 Spline Lightweight Steel Spool 35 Spline Pro Gear & Chrome Moly Yoke
$2,220.00 Select options -
Aluminum Ultra Case Assembly HD 40 Spline Lightweight Steel Spool 35 Spline Pro Gear & Female Coupler
$2,145.00 Select options -
Aluminum Ultra Case Assembly HD 40 Spline Lightweight Steel Spool 10″ Pro Gear & Chrome Moly Yoke
$2,975.00 Select options -
Ultra Case Center Section HD 40 Spline Lightweight Steel Spool 10″ Pro Gear & Female Coupler
$2,975.00 Select options -
Billet Aluminum Case Assembly HD 40 Spline Lightweight Steel Spool 35 Spline Pro Gear & Chrome Moly Yoke
$4,925.00 Select options -
Billet Aluminum Case Assembly HD 40 Spline Lightweight Steel Spool 10″ Pro Gear & Chrome Moly Yoke
$5,675.00 Select options -
Billet Aluminum Case Assembly HD 40 Spline Lightweight Steel Spool 35 Spline Pro Gear & Female Coupler
$4,825.00 Select options -
Billet Aluminum Case Assembly HD 40 Spline Lightweight Steel Spool 10″ Pro Gear & Female Coupler
$5,575.00 Select options -
Load Bolt Assembly For Strange Ultra Case & HD Pro Aluminum Case
$39.00 Add to cart -
Load Bolt Assembly For Strange Billet Case
$39.00 Add to cart -
Pro II Stainless Steel Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
$995.00 Select options
Strange Steering Box - 14" For Funny Cars & Altereds
Ford 9" 4.86 Pro Gear with 28 Spline Pinion Richmond Gear - Produced in Italy
Mopar New Style Axle Bearing & Plate - Each For 2.875" ID Mopar Housing End Fits Axles With 1.5635" Bearing Area
Dana 44 Corvette 4.11 Gear US/Strange Gear - Produced in USA
Strange 4 Piston Directional Caliper Kit With DRM-40 Metallic Brake Pads
Strange Pro Carbon Rear Brake Kit For 5" Bolt Circle Using 5/8" Studs Fits Big Ford / Early Big Ford Housing Ends
Ford 9" Basic Installation Kit For Open Differentials
Strange S-Series Steel Spool For GM 8.5 with 33 Spline Axles
Strange Aluminum Pinion Support For Street, Street / Strip, and Track Use
Strange 1350 Series Transmission Yoke GM 32 Spline - Severe Duty Chrome Moly
Strange Pro II H/D Front Brake Kit 1971-1972 Pinto - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
Double Adjustable Coil-Over Strut 2015-2020 Mustang
Wilwood 12.190" Street Brake Kit With Red Calipers - Fits Late Big Ford Ends
Strange Ball Bearing Pinion Support Includes Bearings & Seal For 28 Spline Pinion Fits 9" Ford Center Sections Used For Drag Racing
Hardened Washer For 5/8" Bolt - .0625" Thick
Strange Pro Series H/D Front Brake Kit 1955-1957 Chevrolet - 4 3/4" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
Pinion Support Bearing Kit For Daytona Style Supports
Ford 10" 5.37 Pro Gear with 35 Spline Pinion Motive Performance Gear - Produced in Italy
Strange Pro Carbon Rear Brake Kit For 5 1/2" Bolt Circle Fits 2012 and Earlier Strange Floater Kits
Strange Dragster / Altered Spindles With Tow Loops - Pair
Pro Touring Reluctor Ring For 05-10 or 11-14 Mustang ABS Systems
Dual Master Cylinder - 1.125" Bore Includes Dust Boot, Pushrod, & Fittings
Front Pinion Race For Strange N1922 & N2322 Pinion Supports Using 28 or 35 Spline Pinion Gear
Strange 2 Pc 1350 Series Transmission Yoke GM TH400 32 Spline - Severe Duty Chrome Moly
Axle Bearing Locking Collar For Strange 40 Spline Axles & Truck Axles
5/8"-18 x .875" Stud Sleeve


