Strange 4 Piston Directional Caliper Kit With DRM-40 Metallic Brake Pads

 
Designed Specifically For Drag Racing

For Pro Series & Pro II Steel Rear Brake Kits
Pad Material Is Unsafe For Front Brake Applications

For Pro II Stainless with Billet Calipers – B1950

Four Piston Directional Calipers – B5002 / B5004
• Aluminum bodies drastically reduce weight
• 1.625″ & 1.750″ pistons vary pressure decreasing pad taper
• Stainless steel pistons resist corrosion
• Anti-rattle clips reduce brake pad vibration and noise

Bolt Kit
• Four 3/8″-24 x 1.125″ grade 8 bolts
• Four 3/8″ ID .125″ thick washers
• Sixteen 3/8″ ID .025″ thick stainless steel alignment shims

DRM-40 Metallic Brake Pads – B5022
• Provides the highest resistance to brake fade
• Recommended for vehicles going over 150 MPH in the 1/4 mile
• Pad residue on rotor surface greatly reduced over hard pads

Brake Hoses and Lines Are Not Included
Calipers are tapped 1/8″ NPT and supplied with male 3 AN fittings

Use Teflon® tape or liquid on the pipe threads of the fitting
Leave a few threads from the tip uncoated
This will avoid depositing material inside the caliper
Torque fitting to 25 ft lbs

Related
Front / Rear kit with DTC-30 semi metallic pads – B1850
Rear kit with DRM-35 metallic pads – B1855