Hardened Washer For 5/8" Bolt - .0625" Thick
1 × $0.36
Strange Single Adjustable Rear Shock 1979-1993 Mustang
1 × $95.00
Strange Pro Series Lightweight Steel Spool Fits Ford 9" with 40 Spline Axles Requires 3.250" Bore Aftermarket Case
1 × $295.00
Strange Single Piston Caliper Kit With Slider Assembly & Semi Metallic Pads
1 × $295.00
Fill Plug Assembly
1 × $24.00
GM 12 Blt 3.55 Standard Gear Set US/Strange Gear - Produced in USA
1 × $372.00
Strange Pro Series Lightweight Steel Spool Fits Mopar 8 3/4" with 30 Spline Axles
2 × $225.00
Lower Control Arm Tube Kit With 1/2" I.D. Rod Ends For Strange Aluminum Struts
1 × $175.00
Hyperco Springs 14" x 2 1/2" ID - 175 Lbs
1 × $156.00
Front Pinion Bearing For Strange N1922 & N2322 Pinion Supports Using 28 Spline Pinion Gear
1 × $30.00
Strange Pro II H/D Front Brake Kit 1993-2002 Camaro & Firebird - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,295.00
Strange Pro II M/D Front Brake Kit Strange Aluminum Struts - 4 1/2" BC 2 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads
1 × $825.00
Strange Pro II Dual Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,374.00
Floater Hub Bearing Drag Race Floater Kits, Aluminum Pro Mod Rear Ends
1 × $75.00
GM 8.4 Corvette 3.90 Gear Set Richmond Gear - Produced in Italy
1 × $405.00
Ford 9" 3.40 Standard Gear Set US/Strange Gear - Produced in USA
1 × $299.00
Strange Pro II Dual Rear Brake Kit For Big Ford / Early Big Ford Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $1,374.00
Eaton Detroit Locker Fits Dana 60 With 35 Spline Axles - 3 Series
1 × $795.00
Ford 9 1/2" 5.17 Pro Gear with 28 Spline Pinion - Lightened Richmond Gear - Produced in Italy
1 × $820.00
Caliper O-Ring Kit For Billet Caliper Using Steel Brakes
1 × $9.00
Strange Pro Series Rear Brake Kit For Big Ford / Early Big Ford Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads
1 × $775.00
Ford 10" 5.67 Pro Gear with 35 Spline Pinion US/Strange Gear - Produced in USA
1 × $1,415.00
Adjustable Pinion Preload Spacer For Ford 8.8 Rear Ends
1 × $22.00
Complete Installation Kit For Strange 12 Bolt Drop-Out Aluminum Case With 3.062" Bore - Designed To Fit Ford 9" Housing
1 × $119.50
Front Pinion Race For OEM Dana 60 & Strange S60
1 × $18.00
Axle Bearing With Locking Collar - Each For Small Ford 2.835" ID Housing End Fits Axles With 1.5635" Bearing Area
1 × $50.00
Reluctor Ring Adapter / Bearing Spacer
1 × $22.00
Ford 9" 4.86 Pro Gear with 28 Spline Pinion Richmond Gear - Produced in Italy
1 × $720.00
Strange Pro Series Rear Brake Kit For Big Ford / Early Big Ford Housing Ends 1 Piece Rotors, 4 Piston Calipers & DRM-35 Metallic Pads
1 × $775.00
Ball Bearing Pinion Support Kit For Use With 28 Spline Pinion Shaft
1 × $235.00
Strange HD 1350 Series Yoke Fits GM 8.5" Rear Ends
1 × $110.00
9" Ford Housing Center For Use With 3" OD Tubing
1 × $325.00
Master Cylinder Adapter Fitting 1/2"-20 Inverted Flare to 3 AN
1 × $10.00
Subtotal: $13,759.86
