$950.00
Application
1979-2004 Mustang housing fabrication
Perfect base for Pro Touring rear end
Description
Strange HD Ford 9″ housing
With upper & lower control arm mounts – No housing ends
Custom widths available at no additional charge
Information Required
Tube to tube width
Pinion Offset – .625″ To The Passenger Side
Same as OEM 8.8 housing
Center Housing – H1112 *
• Constructed from .141″ mild steel
• Heavy duty .282″ thick face plate
• Internal gussets provide rigidity and support axle tubes
• Slots allow exceptional weld contact of housing to tubes
• Extended cover provides clearance for 9″ & 9 1/2″ gear sets
* Modified for this application
Fill & Drain plugs – H1116 / H1116
• Facilitate fluid changes
• Allows for inspection of ring gear
Housing Tubing – H1141
• DOM 1026 steel
• 3.250″ OD x .250″ wall thickness
1979-2004 Mustang Mounts
• Strange HD upper control arm mounts
• Lower control arm mounts with multiple bolt hole locations
Adjustable Shock Mounts
• 6 positions with .375″ increments
• 1.875″ of adjustment
• Allows ride height adjustments without affecting stroke
Professionally Welded
• Jig welded to ensure proper alignment
• Tubes internally & externally welded to housing
• Provides maximum support & rigidity
Related Components
Floater Kit
Pro Touring………… F5010
Housing Ends
Late Big Ford……… H1137
Big Ford……………… H1135
Mustang 8.8……….. H1138
Gasket
Lube Locker………. H1111S
See Our Full Line of Center Sections
Available for Drag Race Only, Street / Track, and Performance Street Vehicles
Description
Ford 9″ housing / 79-04 Mustang / with mounts (no ends)
Related products
-
Strange HD 9″ Ford Housing For GM G-Body Application Includes Mounts, Ends, Fill, Drain, & Vent
PN : HF9GGME$1,050.00 Read more -
Strange HD 9″ Ford Housing For 79-04 Mustang – Includes Upper Mounts No Lower Control Arm Mounts or Housing Ends
PN : HF9M86$825.00 Read more -
9″ Ford Housing Center For Use With 3 1/4″ OD Tubing
PN : H1112$325.00 Add to cart -
Strange HD 9″ Ford Housing Bolt-in For 2005-2014 Mustang Complete With Mounts & Ends
PN : HF9M05ME$1,095.00 Read more
Recently viewed products
-
Aluminum Ultra Case Assembly Lightweight 35 Spline Steel Spool 28 Spline Pro Gear & Chrome Moly Yoke
PN : PRF205$2,029.00 Select options -
Front 4 Piston Carbon Brake Kit Fits Strange Ultra Struts Also Struts Built With Strange Bodies
PN : C4700WC$3,995.00 Read more -
Strange 1350 Series Transmission Yoke Lenco 32 Spline – Severe Duty Chrome Moly
PN : U1663$200.00 Add to cart -
Double Adjustable Rear Coil-Over Shock 2010-2015 Camaro – Accepts Factory Spring
PN : S5090$325.00 Add to cart
-
Hyperco Springs 7" x 2 1/2" ID - 175 Lbs 4 × $156.00
-
Adjustable Pinion Preload Spacer For Ford 8.8 Rear Ends 1 × $22.00
-
1982-2002 Camaro / Firebird Single Adjustable Rear Shock 5 × $175.00
-
Strange Pro II Dual Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends 2 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads 1 × $1,350.00
-
Strange Pro II H/D Front Brake Kit For GM 1971-1977 Monza / Vega 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 4 × $1,085.00
-
Complete Installation Kit For Ford 8" Rear End 1 × $110.00
-
AirHeart / Kelsey Hayes / Wilwood Brake Pad For Older 1 Piston Calipers With Round Pads 2 × $9.00
-
GM 8.5 10 Blt 3.73 Standard Gear Set Richmond Gear - Produced in Italy 1 × $390.00
-
Strange Pro Series HD Lightweight Steel Spool Fits Ford 9" with 40 Spline Axles Requires 3.812" Bore Strange Case 1 × $295.00
-
Hyperco Springs 12" x 2 1/2" ID - 450 Lbs 3 × $156.00
-
Seamless Chrome Moly Driveshaft Assembly With HD Trans Yoke, 1350 Weld Ends & U-joints For Strange S60 Installed in 1993-2002 GM F-Body 1 × $360.00
-
Strange Ultra Case and Support Package 3.812" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 28 Spline Pinion Gears 2 × $1,464.00
-
3 AN x 1/8" NPT 45° Fitting 2 × $8.00
-
Hyperco Springs 16" x 2 1/2" ID - 100 Lbs 1 × $156.00
-
2014-19 Corvette 4.10 Standard Gear Set Motive V888410 Performance Gear - Produced in Italy 1 × $1,060.00
-
Double Adjustable Coil-Over Strut 2005-2014 Mustang 1 × $529.00
-
Strange Pro Series Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends 1 Pc Rotors, 4 Piston Calipers & DRM-35 Metallic Pads 1 × $775.00
-
Strange Ultra Case and Support Package 3.250" Bore Case & Taper / Ball Bearing Support With Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears 1 × $1,395.00
-
1310 Series U-Joint 1 × $30.00
-
Hyperco Springs 8" x 2 1/2" ID - 250 Lbs 1 × $156.00
-
Strange Pro Carbon Completion Kit Carbon Rotors & Pads, Ultra Calipers, & 4 3/4" BC Hats No Caliper Mounts 1 × $3,150.00
-
Strange 1350 Series Transmission Yoke Lenco 16 Spline - Severe Duty Chrome Moly 1 × $200.00
-
Double Adjustable Coil-Over Strut 2015-2020 Mustang 1 × $529.00
-
Strange Pro II H/D Front Brake Kit '67-'69 Camaro, '67-'72 Chevelle, ... 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 2 × $1,075.00
-
Strange 1350 Series Transmission Yoke Mopar 30 Spline - Severe Duty Chrome Moly 5 × $185.00
-
Strange Brake Pressure Gauge Includes Bleed Screw Adapter Fitting 1 × $45.00
-
Hyperco Springs 14" x 2 1/2" ID - 225 Lbs 2 × $156.00
-
Hyperco Springs 7" x 2 1/2" ID - 500 Lbs 2 × $156.00
-
GM 7.5 10 Bolt Ring Gear Spacer Adapts 2 Series Carrier to 3 Series Gear 2 × $50.00
-
Hyperco Springs 10" x 2 1/2" ID - 250 Lbs 1 × $156.00
-
Hyperco Springs 14" x 2 1/2" ID - 350 Lbs 1 × $156.00
-
Hyperco Springs 10" x 2 1/2" ID - 225 Lbs 1 × $156.00
-
Strange Billet 1350 Series Yoke For Ford 9" Using 28 Spline Pinion Shaft 1 × $295.00
-
Double Adjustable Rear Shock Multiple Applications 1 × $295.00
-
Hyperco Springs 14" x 2 1/2" ID - 100 Lbs 2 × $156.00
-
Complete Installation Kit For 1986-2014 Ford 8.8 2 × $98.00
-
Rear Pinion Bearing Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear 1 × $45.00
-
Strange Pro II H/D Front Brake Kit 1965-1968 Corvette - 4 3/4" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 2 × $1,075.00
-
Double Adjustable Front Shock GM Applications 2 × $295.00
-
Ford 9" Pinion Depth Shim Kit 2 × $16.00
-
Strange Pro II Rear Brake Kit For 1957-1964 Oldsmobile Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 3 × $875.00
-
Strange Pro Series Rear Brake Kit For 05-14 Mustang OEM Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $850.00
-
Single Adjustable Rear Shock Mopar - Multiple Applications 5 × $175.00
-
Knight Springs 12" x 2 1/2" ID - 150 Lbs 1 × $80.00
-
Strange Pro Series Lightweight Steel Spool For Chevy 12 Bolt Car with 35 Spline Axles Fits 3 Series Gear Sets 1 × $198.00
-
Sensor Plug O-Ring 1 × $0.33
-
GM 12 Blt 3.08 Standard Gear Set Richmond Gear - Produced in Italy 1 × $397.00
-
Strange Ultra Case and Support Package Lightened 3.812" Bore Case & Taper / Ball Bearing Support Includes Installation Kit For 9" or 9 1/2" 28 Spline Pro Gears 1 × $1,464.00
-
1982-2002 Camaro / Firebird Double Adjustable Rear Shock 2 × $295.00
-
Single Adjustable Rear Shock Multiple GM Applications 1 × $175.00
-
Strange 1/2"-20 x 3" Screw-in Wheel Stud 3 × $3.00
-
Strange Pro II H/D Front Brake Kit Dart, Lancer, Barracuda, ... 4 1/2" B.C. 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $1,150.00
-
Strange Dual Remote Reservoir 2 × $164.00
-
Strange S-Series Steel Spool For GM 8.5 with 30 Spline Axles 2 × $169.00
-
Strange Ball Bearing Pinion Support Includes Bearings & Seal For 28 Spline Pinion Fits 9" Ford Center Sections Used For Drag Racing 2 × $395.00
-
Basic Installation Kit For Ford 8" Rear End Bearings & Races Are Not Included 2 × $35.00
-
Master Cylinder Rebuild Kit For Strange B3364 Master Cylinder 2 × $35.00
-
Strange Pro II Dual Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $1,350.00
-
Hyperco Springs 12" x 2 1/2" ID - 200 Lbs 1 × $156.00
-
Carbon Brake Conversion Kit Upgrades From Steel to Carbon Brakes For Strange 10 1/2" Live Axle and 2013 & Later 9 / 9 1/2" Top Loader 2 × $3,895.00
-
Dual Master Cylinder - 1.032" Bore Includes Dust Boot, Pushrod, Fittings, Firewall Reinforcing Plates & Hardware 1 × $99.00
-
Strange 1350 Series Transmission Yoke GM 27 Spline - Heavy Duty Nodular Iron 2 × $115.00
-
Strange Pro Series M/D Front Brake Kit For 1994-2004 Mustang Reusing OEM Hubs 1 Pc Rotors, 2 Piston Calipers & Semi Metallic Pads 1 × $575.00
-
Strange Door Car Steering Rack 22:1 Ratio - 24 1/2" Tie Rod Centers 1 × $695.00
-
3 AN Coupling Nut Sleeve 1 × $1.00
-
Strange 11" Carbon Brake Rotor For Front and Rear Carbon Brake Kits 2 × $850.00
-
5/8" Stud Kit with 1.500" Wide Shank Includes Lug Nuts & .438" Thick Washers 2 × $100.00
-
ARP 7/16" Ring Gear Bolt Kit For 9" Ford 40 Spline HD Aluminum Spool 4 × $90.00
-
Solid Pinion Bearing Preload Spacer 1 × $15.00
-
Strange Pro Series H/D Front Brake Kit '66-'69 Fairlane, '67-'69 Mustang, ... 4 1/2" B.C. 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $975.00
-
Rear Pinion Race Fits Strange Ultra & Billet Cases With Tapered Bearing Support and 28 or 35 Spline Pinion Gear 1 × $30.00
-
Double Adjustable Front Shock Multiple Ford / Mercury Applications 1 × $295.00
-
Hyperco Springs 14" x 2 1/2" ID - 325 Lbs 1 × $156.00
-
Ford Mustang OEM Reluctor Ring - Each For 2005-2014 C-Clip Style Axle 1 × $60.00
-
Hyperco Springs 10" x 2 1/2" ID - 400 Lbs 1 × $156.00
-
1/2" x 3" Allen Head Stud 1 × $5.50
-
Wilwood / JFZ 2 Piston Caliper Brake Pad Semi Metallic 2 × $16.00
-
ABS Sensor Adapter For Strange Pro Touring Floater Kit When Using 2011-2014 Mustang ABS System 1 × $33.00
-
Braided Stainless Steel Brake Line - 22" Teflon® lined With Straight 3 AN Fittings 1 × $21.00
-
Pro Series II Spindle Mount Brake Kit For Altereds & Funny Cars with S3423 Spindles Single Piston Calipers & Two Piece Slotted Rotors 3 × $725.00
-
Residual Pressure Valve - 10 Lbs 5 × $25.00
-
Floater Hub Seal 2012 & Older Drag Race Floater Kits 1 × $20.00
-
GM 8.5 10 Blt 3.42 Standard Gear Set Richmond Gear - Produced in Italy 2 × $415.00
-
Strange S-Series Steel Spool For GM 8.5 with 28 Spline Axles 1 × $169.00
-
Strange Single Adjustable Front Strut 2005-2010 Mustang 2 × $169.00
-
Strange Pro Carbon Rear Brake Kit For 4 3/4" Bolt Circle Using 5/8" Studs Fits 1957-1964 Oldsmobile Ends 1 × $3,150.00
-
Strange Pro Series Rear Brake Kit For 3.150" Symmetrical Housing Ends 1 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $775.00
-
Strange 1350 Series Transmission Yoke Ford 28 Spline - Severe Duty Chrome Moly 1 × $185.00
-
Dual Master Cylinder Strange Fast Fill Design Includes Remote Reservoir 1 × $590.00
-
Strange Quick Release Hub Designed For Grant Steering Wheels 2 × $135.00
-
GM 8.5 10 Blt 5.57 Standard Gear Set Richmond Gear - Produced in Italy 1 × $360.00
-
GM 12 Bolt Pinion Bearing Preload Assembly 1 × $32.00
-
1979-1993 Mustang Manual Brake Conversion Kit 2 × $169.00
-
Strange Pro II Rear Brake Kit For Big Ford / Early Big Ford Housing Ends 2 Pc Rotors, 4 Piston Calipers & DTC-30 Semi Metallic Pads 1 × $875.00
-
Axle Bearing With Locking Collar - Each For A1032 and A1092 Eliminator Kits Fits Axles With 1.400" Bearing Area 2 × $50.00
-
5/8" Stud Kit with 1.875" Wide Shank Includes Lug Nuts & .250" Thick Washers 1 × $100.00
-
2 Magnet Pick-Up Collar For Strange Chrome Moly Yokes Will Not Fit Ford 9" Yokes 1 × $70.00
-
Carbon Brake Kit For Strange 9" / 9 1/2" Top Load Live Axle Fits 2012 And Older Rear Ends 1 × $4,750.00
-
Strange Ultra Case and Support Package Lightened 3.812" Bore Case & Taper / Ball Bearing Support Includes Installation Kit For 9" or 9 1/2" 35 Spline Pro Gears 1 × $1,495.00
-
C-Clip Eliminator Kit - For Drag Racing Only For Pro Race Axles With 1.563" Bearing Area Fits Small GM OEM Housing Ends 1 × $210.00
-
Front Pinion Race For Strange N1922 & N2322 Pinion Supports Using 28 or 35 Spline Pinion Gear 1 × $15.00
-
Master Cylinder Adapter Fitting 1/2"-20 Inverted Flare to 3 AN 1 × $10.00
-
Load Bolt Assembly For Strange Ultra Case & HD Pro Aluminum Case 1 × $39.00