Strange HD Pro Completion Kit For Tapered Bearing Pinion Support Installing 35 Spline Pinion Gear

Application
For Strange HD Pro case kits – P3200 / P3203 / P3207
Installing 35 spline Pro gear

For 28 Spline Pinion – See R3200ST

Description
Supplies remainder of installation components
Less carrier, gear set, and yoke or coupler

Notes
Support races, o-ring, & tail bearing are not included
These parts are supplied in case kits

If Performing a Gear Change – See R5238 / R5238WR

Support races are not included

Kit Includes

Front and rear pinion bearings – N1936 / N1938
Side bearings and races – D1588, D1590, or D1592
Pinion seal – N1961
Flanged pinion nut – N1922B
Adjustable pinion preload spacer – N1919
Solid machinable pinion preload spacer – N1924A
1/2″-20 and/or 7/16″-20 ring gear bolts – N1964 / N1965 / D1565RK

Information Required

Case Bore Size
3.062″ / 3.250″ / 3.812″

For Strange Spool
Steel or Aluminum

For Other Spools
The ring gear bolts supplied are designed for a flange thickness of .375″
If your spool exceeds this dimension the ring gear bolts will be too short
Specify if using an aluminum spool

Related Components

Pinion support races… N1931 / N1939
Support o-ring………………. N1958A
Tail bearing……………………. N1943
Fel Pro gasket……………….. H1112G
Fel Pro Teflon® gasket…… H1111
Lube Locker gasket……….. H1111S